ERNiCrMo-3 Welding Wire Inconel 625 Welding Waya
ErNiCrMo-3 (Inconel 625 UNSNO6625)Waya Welding
♦ Sunan Waya na Weliding: ErNiCrMo-3, Inconel 625 TIG/MIG Waya
♦ MOQ:15kg
♦ Siffar: MIG(15kgs/spool), TIG(5kgs/akwatin)
♦ Girma:Diamita 0.01mm-8.0mm
♦ Girman gama gari:0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦ Matsayi:Ya dace da Takaddun shaida AWS A5.14 ASME SFA A5.14
ErNiCrMo-3amfani da waldi 625 (N06625) gami, 20 gami, 825,25-6Mo,9% Ni karfe ko wani molybdenum karfe, kuma amfani da waldi na daban-daban kayan da lalata resistant surfacing na abu surface.
Kyawawan kaddarorin inji a high da ƙananan yanayin zafi.Juriya ga lalata mai ƙarfi, ƙwanƙwasa ƙwanƙwasa damuwa, ɓarna da ɓarna baya a cikin kewayon oxidation da rage yawan kafofin watsa labarai.
| C | Al | Si | Mn | Cr | Ni | Ti | Fe | S | Cu | Mo | P | Nb + Ta | Wasu |
| ≤0.10 | ≤0.40 | ≤0.50 | ≤0.50 | 20.0 - 23.0 | ≥58.0 | ≤0.40 | ≤5.0 | ≤0.015 | ≤0.50 | 8.0 - 10.0 | ≤0.02 | 3.15 - 4.15 | ≤0.50 |
| Diamita | Tsari | Volt | Amps | Garkuwar Gas | |
| In | mm | ||||
| 0.035 | 0.9 | GMAW | 26-29 | 150-190 | Canja wurin fesa100% Argon |
| 0.045 | 1.2 | 28-32 | 180-220 | ||
| 1/16 | 1.6 | 29-33 | 200-250 | ||
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | 15-20 | 120-175 | ||
| 1/8 | 3.2 | 15-20 | 150-220 | ||
| Sharadi | Ƙarfin Tensile MPa (ksi) | Ƙarfin Haɓaka MPa (ksi) | Tsawaita% |
| Rahoton da aka ƙayyade na AWS | 760 (110) | Ba a kayyade ba | Ba a kayyade ba |
| Sakamako na yau da kullun kamar walda | 790 (115) | 590(85) | 35 |
Me yasa ERNiCrMo-3?
Ƙananan abun ciki na baƙin ƙarfe, ana iya amfani dashi a cikin walda na nickel-chromium molybdenum gami,
Ana iya amfani da shi don cladding da walda na daban-daban tushe karafa kamar Ni-Cr-Mo gami da bakin karfe da carbon karfe.
Yana da kyau juriya na iskar shaka da rage yanayi.
Babban abun ciki na molybdenum yana ba da kyakkyawar damuwa da juriya ga rami da ramukalalata.
Filin aikace-aikacen ERNiCrMo-3:
Ya dace da walda na nickel-chrome-molybdenum gami, kamar Inconel625, Incoy 825, kuma ana iya amfani da shi don waldawa da surfacing na nickel-base gami da bakin karfe dissimilar kayan.Ana iya amfani dashi a cikin yanayi daga ƙananan zafin jiki zuwa 540 ℃.
