Waya walda ta nickel, ErNiCu-7, Monel 400/K500 Waya Welding
Wayar walda ta nickel, ErNiCu-7, Monel 400/K500 Waya Welding,
AWS A5.14 ErNiCu7, Monel 400/K500 Nickel Welding, nickel waldi waya,
ErNicu-7 (Monel 400/K500) Waya Welding
♦Sunan kayan walda: Wayar walda ta nickel, ErNiCu-7, Monel 400/K500 Waya Welding
♦MOQ: 15kg
♦Form: MIG (15kgs/spool), TIG (5kgs/akwati)
♦Girman: Diamita 0.01mm-8.0mm
♦Girman gama gari: 0.8MM / 1.0MM / 1.2MM / 1.6MM / 2.4MM / 3.2MM / 3.8MM / 4.0MM / 5.0MM
♦Ma'auni: Yayi daidai da Takaddun shaida AWS A5.14 ASME SFA A5.14
ErNiCu-7 Based Material ne Monel 400 da Monel K500, Wannan walda waya ne yafi amfani da waldi MONEL400 gami, MONELR404 gami da MOENLK-500 gami da tungsten inert-gas waldi, MGW da submerged baka waldi, kuma za a iya amfani da karfe surface waldi. ta MGW da waldawar baka.
Ana ba da shawarar yin amfani da murfin waya na Erni-1 don takamaiman yanayin walda gas.
ERNiCu-7 Chemical Haɗin
| C | Al | Ni | Si | Mn | P | S | Fe | Cu | Ti | Sauran |
| ≤0.15 | ≤1.25 | 62.0-69.0 | ≤1.25 | ≤4.0 | ≤0.02 | ≤0.015 | ≤2.5 | Bal | 1.5-3.0 | ≤0.50 |
ERNiCu-7 Na Musamman Welding Siga
| Diamita | Tsari | Volt | Amps | Garkuwar Gas | |
| In | mm | ||||
| 0.035 | 0.9 | GMAW | 26-29 | 150-190 | 75% Argon + 25% Helium |
| 0.045 | 1.2 | GMAW | 28-32 | 180-220 | 75% Argon + 25% Helium |
| 1/16 | 1.6 | GMAW | 29-33 | 200-250 | 75% Argon + 25% Helium |
| 0.035 | 0.9 | GTAW | 12-15 | 60-90 | 100% Argon |
| 0.045 | 1.2 | GTAW | 13-16 | 80-110 | 100% Argon |
| 1/16 | 1.6 | GTAW | 14-18 | 90-130 | 100% Argon |
| 3/32 | 2.4 | GTAW | 15-20 | 120-175 | 100% Argon |
| 1/8 | 3.2 | GTAW | 15-20 | 150-220 | 100% Argon |
| 3/32 | 2.4 | SAW | 28-30 | 275-350 | Canjin da ya dace zai iya amfani da shi |
| 1/8 | 3.2 | SAW | 29-32 | 350-450 | Canjin da ya dace zai iya amfani da shi |
| 5/32 | 4.0 | SAW | 30-33 | 400-550 | Canjin da ya dace zai iya amfani da shi |
ERNiCu-7 Mechanical Properties
| Sharadi | Ƙarfin Tensile MPa (ksi) | Ƙarfin Haɓaka MPa (ksi) | Tsawaita% |
| Rahoton da aka ƙayyade na AWS | 480(70) Na Musamman | Ba a kayyade ba | Ba a kayyade ba |
| Sakamako na yau da kullun kamar walda | 530 (77) | 360(53) | 34 |
Me yasa ERNiCu-7?
•Babu Preheat da ake buƙata, matsakaicin matsakaicin zafin jiki 150 ℃ kuma babu PwHT da ake buƙata
•Aikace-aikacen walda iri ɗaya sun haɗa da haɗa gami zuwa nickel 200 da gami da jan karfe-nickel-
•An yi amfani da shi sosai a aikace-aikacen ruwa saboda kyakkyawan juriya ga lalatawar ruwan teku da ruwa mai laushi.
•Ana iya amfani da shi don rufin MIG akan karfe bayan Layer na farko tare da nickel 208
MOQ: 15kg
Form: MIG (15kgs/spool), TIG (5kgs/akwati)
Girman: Diamita 0.01mm-8.0mm Girman Kowa: 0.8MM/1.0MM/1.2MM/1.6MM/2.4MM/3.2MM/3.8MM/4.0MM/5.0MM
Ma'auni: Yayi daidai da Takaddun shaida AWS A5.14 ASME SFA A5.14
